首页-江苏省技术性贸易措施平台

|

| 网站声明 | 注册

邮箱: js_wto@163.com

电话: 025-86500544

通报预警 > 通报 > WTO/TBT通报

坦桑尼亚PCD 784：2026，纺织品-围巾-规范，第一版

字号: [ 大中小 ]

世界贸易组织	G/TBT/N/TZA/1563 2026-03-31 26-2565

技术性贸易壁垒	原文：英语

通报

以下通报根据TBT协定第10.6条分发

1.	通报成员: 坦桑尼亚如可能，列出涉及的地方政府名称 ( 3.2条和7.2 条)：
2.	负责机构：坦桑尼亚标准局
3.	通报依据条款： [X] 2.9.2 [ ] 2.10.1 [ ] 5.6.2 [ ] 5.7.1 [ ] 3.2 [ ] 7.2 通报依据的条款其他：
4.	覆盖的产品：披肩、围巾、围巾、面纱、面纱及类似物品（不包括针织或钩编）（HS编码：6214）；纺织面料（ICS编码：59.080.30） HS编码：6214　　ICS编码：59.080.30
5.	通报标题： PCD 784：2026，纺织品-围巾-规范，第一版；语言：英语页数：9 链接网址：
6.	内容简述：该坦桑尼亚国家标准草案规定了梭织和针织围巾及其制造织物的要求、取样和测试方法。它没有指定设计和精加工。本标准不适用于阿巴亚围巾。
7.	目标与理由：消费者信息、标签；质量要求；减少贸易壁垒，促进贸易
8.	相关文件： ISO 105-B01，纺织品。色牢度试验。B01部分：日光色牢度。ISO 105-B02，纺织品。色牢度试验。B02部分：人造光色牢度：氙弧褪色灯试验。ISO 105-C10，纺织品。色牢度试验。C10部分：用肥皂或肥皂和苏打洗涤的色牢度。ISO 105-D01，纺织品。色牢度试验。D01：耐干洗的色牢度。ISO 105-E04，纺织品。色牢度试验。E04：耐汗渍的色牢度。ISO 105-X11，纺织品。色牢度试验。X11：耐摩擦的色牢度。ISO 105-X12，纺织品。色牢度试验。X12：耐摩擦的色牢度。ISO 1833，纺织品。定量化学分析。ISO 2859-1：按属性检验的取样程序。第1部分：逐批检验用验收质量限(AQL)索引的抽样方案。ISO 3071，纺织品。水浸提液pH值的测定。ISO 3801，纺织品。机织物。单位长度质量和单位面积质量的测定。ISO 6330，纺织品。家用洗涤和烘干程序。ISO 12945-2，纺织品。织物表面起球、起毛或消光倾向的测定。ISO 8559-2，服装的尺寸名称。第2部分：织物的拉伸性能。第1部分：织物和成品纺织品的接缝拉伸性能。第1部分：织物接缝处纱线抗滑移性的测定。第1部分：固定接缝打开方法。ISO 13937-4：纺织品。织物的撕裂性能。第4部分：舌形试样撕裂力的测定（双撕裂试验）。ISO 13938，纺织品。织物的爆裂性能ISO 14362-3，纺织品。源自偶氮着色剂的某些芳香胺的测定方法。第3部分：使用可能释放4-氨基偶氮苯的某些偶氮着色剂的检测。ISO 22198，纺织品。织物。宽度和长度的测定
9.	拟批准日期：待定和通知拟生效日期：待定
10.	意见反馈截止日期： 2026年5月30日；[X]距通报60天；指定处理有关通报的意见的机构或当局的联系方式：坦桑尼亚局坦桑尼亚标准联系人：Bahati Samillani 女士萨利姆·穆罕默德·萨卢姆博士。Ashura Abdul Katunzi 坦桑尼亚标准局局长。信箱9524 达累斯萨拉姆电话：+255 653 267 554、+255 715 867 800 传真：+(255 22)245 095 9 电子邮件：dg@tbs.go.tz、nep@tbs.go.tz、bahati.samillani@tbs.go.tz、salim.mohamed@tbs.go.tz 网站：http://www.tbs.go.tz
11.	文本可从以下机构得到： [ ] 国家通报机构 [X] 国家咨询点，或其他机构的联系地址、传真及电子邮件地址(如能提供): https://members.wto.org/crnattachments/2026/TBT/TZA/26_01794_00_e.pdf Tanzania Bureau of Standards Ubungo，Morogoro Road/Sam Nujoma Road。坦桑尼亚达累斯萨拉姆9524号信箱电话：+255 22 245 029 8/+255 22 245 020 6 电子邮件：nep@tbs.go.tz 网站：www.tbs.go.tz 传真：+255 22 245 095 9 电子邮件：info@tbs.go.tz 网站：http://www.tbs.go.tz



	G/TBT/N/TZA/1563
	31 March 2026
(26-2565)
Committee on Technical Barriers to Trade		Original: English

NOTIFICATION

The following notification is being circulated in accordance with Article 10.6

1.	Notifying Member: TANZANIA If applicable, name of local government involved (Articles 3.2 and 7.2):
2.	Agency responsible: Tanzania Bureau of Standards
3.	Notified under Article 2.9.2 [X], 2.10.1 [ ], 5.6.2 [ ], 5.7.1 [ ], 3.2 [ ], 7.2 [ ], Other:
4.	Products covered (HS codes or national tariff lines. ICS numbers may be provided in addition, where applicable): Shawls, scarves, mufflers, mantillas, veils and similar articles (excl. knitted or crocheted) (HS code(s): 6214); Textile fabrics (ICS code(s): 59.080.30)
5.	Details of notified document(s) (title, number of pages and languages, means of access): PCD 784:2026, Textiles – Scarf — Specification, First edition; (9 page(s), in English) Link to notified document(s) and/or contact details for agency or authority which can provide copies upon request: https://members.wto.org/crnattachments/2026/TBT/TZA/26_01794_00_e.pdf Tanzania Bureau of Standards Ubungo, Morogoro Road/Sam Nujoma Road P. O. Box 9524 DAR ES SALAAM, TANZANIA Tel. No: +255 22 245 0298/+255 22 245 0206 Email: nep@tbs.go.tz Website: www.tbs.go.tz Telefax: +255 22 2450959 E-mail: info@tbs.go.tz Website: http://www.tbs.go.tz
6.	Description of content: This Draft Zanzibar National Standard specifies the requirements, sampling and test methods for woven and knitted scarves and fabrics intended for their manufacture. It does not specify design and finishing. This standard is not applicable to abaya scarves.
7.	Objective and rationale, including the nature of urgent problems where applicable: Consumer information, labelling; Quality requirements; Reducing trade barriers and facilitating trade
8.	Relevant documents: ISO 105-B01, Textiles — Tests for colour fastness — Part B01: Colour fastness to light: Daylight. ISO 105-B02, Textiles — Tests for colour fastness — Part B02: Colour fastness to artificial light: Xenon arc fading lamp test. ISO 105-C10, Textiles — Tests for colour fastness — Part C10: Colour fastness to washing with soap or soap and soda. ISO 105-D01, Textiles — Tests for colour fastness — Part D01: Colour fastness to dry cleaning. ISO 105-E04, Textiles — Tests for colour fastness — Part E04: Colour fastness to perspiration. ISO 105-X11, Textiles — Tests for colour fastness - Part X11: Colour fastness to hot pressing. ISO 105-X12, Textiles —Tests for colour fastness — Part X12: Colour fastness to rubbing. ISO 1833, Textiles — Quantitative chemical analysis. ISO 2859-1: Sampling procedures for inspection by attributes. Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection. ISO 3071, Textiles — Determination of pH of the aqueous extract. ISO 3801, Textiles — Woven fabrics — Determination of mass per unit length and mass per unit area. ISO 6330, Textiles — Domestic washing and drying procedures for textile testing. ISO 12945-2, Textiles — Determination of fabric propensity to surface pilling, fuzzing or matting — Part 2: Modified Martindale method. ISO 8559-2, Size designation of clothes — Part 2: Primary and secondary dimension indicators. ISO 13934-1, Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method. ISO 13935-1, Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 1: Determination of maximum force to seam rupture using the strip method. ISO 13936-1, Textiles — Determination of the slippage resistance of yarns at a seam in woven fabrics Part 1: Fixed seam opening method. ISO 13937-4: Textiles — Tear properties of fabrics. Part 4: Determination of tear force of tongue-shaped test specimens (Double tear test). ISO 13938, Textiles — Bursting properties of fabrics ISO 14362-3, Textiles — Methods for determination of certain aromatic amines derived from azo colorants. Part 3: Detection of the use of certain azo colorants, which may release 4-aminoazobenzene. ISO 22198, Textiles — Fabrics — Determination of width and length
9.	Proposed date of adoption: To be determined and notified Proposed date of entry into force: To be determined
10.	Provision of comments Final date for comments: 30 May 2026 [X] 60 days from notification Contact details of agency or authority designated to handle comments regarding the notification: Tanzania Bureau of Standards Contact person(s): Ms. Bahati Samillani Mr. Salim Mohamed Salum Dr. Ashura Abdul Katunzi Director General Tanzania Bureau of Standards P.O. Box 9524 Dar es Salaam Tel: +255 653 267 554, +255 715 867 800 Fax: +(255 22) 245 0959 Email: dg@tbs.go.tz , nep@tbs.go.tz, bahati.samillani@tbs.go.tz, salim.mohamed@tbs.go.tz Website: http://www.tbs.go.tz

相关通报列表：

江苏省技术性贸易措施信息平台

版权所有: 江苏省质量和标准化研究院网站的备案号: 苏ICP备09017254号