首页-江苏省技术性贸易措施平台

通报预警 > 通报 > WTO/TBT通报

美国全尺寸婴儿床的安全标准

字号: [ 大中小 ]

世界贸易组织	G/TBT/N/USA/564/Add.14 2026-05-05 26-3322

技术性贸易壁垒	原文：英语

通报

补遗

以下 2026年05月04日的信息根据美国代表团的要求分发。

全尺寸婴儿床的安全标准

补遗理由：

补遗原因：
[]评议期变更-日期：
[]已通知采取的措施-日期：
[X]·通报措施公布-日期：2026年5月4日
[X]·通报措施生效-日期：2026年8月1日；除非委员会在2026年6月3日之前收到重大不利评议。如果委员会收到这样的评议，它将在《联邦公报》上公布一份文件，在生效日期之前撤销这一直接的最终规则。自2026年8月1日起，联邦公报主任批准通过引用纳入本规则中列出的某些材料。
[X]最终措施文本可从¹获得：

https://members.wto.org/crnattachments/2026/TBT/USA/final_measure/26_02357_00_e.pdf
[]通报措施撤回或撤销日期：

·若措施被重新通报，则相关编号为：
[]通知措施的内容或范围发生变化，文本可从¹获得：

新的意见反馈截止日期（如适用）：

[]发布的解释性指南和文本可从¹获得：
[]其他：

描述：2010年，美国消费品安全委员会（委员会或CPSC）根据2008年消费品安全改进法案（CPSIA）第104节发布了全尺寸婴儿床的消费品安全标准。该标准通过参考ASTM F1169-10纳入，全尺寸婴儿床的标准消费者安全规范，并进行了修改。2019年，该标准进行了更新，通过引用纳入了ASTM F1169-19。当自愿标准组织修订标准时，CPSIA规定了更新基于自愿标准的耐用婴儿或幼儿产品强制性标准的流程。与CPSIA更新流程一致，该直接最终规则更新了全尺寸婴儿床的强制性标准，以参考ASTM 2025版本的自愿标准。
该规则于2026年8月1日生效，除非委员会在2026年6月3日之前收到重大不利评议。如果委员会收到这样的评议，它将在《联邦公报》上公布一份文件，在生效日期之前撤销这一直接的最终规则。自2026年8月1日起，联邦公报主任批准通过引用纳入本规则中列出的某些材料。
91联邦公报(FR)23908，2026年5月4日；联邦法规（CFR）第16章第1219部分：

https://www.govinfo.gov/content/pkg/FR-2026-05-04/html/2026-08632.htm

https://www.govinfo.gov/content/pkg/FR-2026-05-04/pdf/2026-08632.pdf
现有(ASTM F1169-19)合并标准的只读副本可在ASTM网站上免费查看：

https://www.astm.org/READINGLIBRARY/。修订后标准(ASTM F1169-25)的只读副本，包括标识从2019年版本到2025年版本变化的红线版本，可在ASTM网站上免费获取：

https://www.astm.org/CPSC.htm。
该直接最终规则由案卷号CPSC-2010-0075标识。案卷文件夹可从Regulations.gov获取，网址为

https：//www.regulations.gov/docket/CPSC-2010-0075/document，并提供对主要文件和支持文件以及收到的意见的访问。也可以通过搜索案卷号从Regulations.gov获取文件。世贸组织成员及其利益相关者被要求在美国东部时间2026年6月3日下午4点或之前向美国TBT询问点提交重大不利意见。美国技术性贸易壁垒咨询点从世贸组织成员及其利益相关者那里收到的意见将与消费品安全委员会分享，如果在评议期间收到，也将提交给Regulations.gov的备审单。
在符号G/TBT/N/USA/564下通知的其他行动由案卷号CPSC-2019-0025标识。

脚注1：可通过网站地址、pdf附件或其他最终/修订措施和/或解释性指南的文本出处获取上述信息。



	G/TBT/N/USA/564/Add.14
	5 May 2026
(26-3322)
Committee on Technical Barriers to Trade		Original: English

NOTIFICATION

Addendum

The following communication, dated 4 May 2026, is being circulated at the request of the delegation of the United States of America.

_______________

Title: Safety Standard for Full-Size Baby Cribs

Reason for Addendum:
[ ]	Comment period changed - date:
[ ]	Notified measure adopted - date:
[X]	Notified measure published - date: 4 May 2026
[X]	Notified measure enters into force - date: 1 August 2026; unless the Commission receives a significant adverse comment by 3 June 2026. If the Commission receives such a comment, it will publish a document in the Federal Register, withdrawing this direct final rule before its effective date. The incorporation by reference of certain material listed in this rule is approved by the Director of the Federal Register as of 1 August 2026.
[X]	Text of final measure available from[1]: https://members.wto.org/crnattachments/2026/TBT/USA/final_measure/26_02357_00_e.pdf
[ ]	Notified measure withdrawn or revoked - date: Relevant symbol if measure re-notified:
[ ]	Content or scope of notified measure changed and text available from1: New deadline for comments (if applicable):
[ ]	Interpretive guidance issued and text available from1:
[ ]	Other:

Description: In 2010, the U.S. Consumer Product Safety Commission (Commission or CPSC) published a consumer product safety standard for full-size baby cribs under section 104 of the Consumer Product Safety Improvement Act of 2008 (CPSIA). The standard incorporated by reference ASTM F1169-10, Standard Consumer Safety Specification for Full-Size Baby Cribs, with modifications. In 2019, the standard was updated to incorporate by reference ASTM F1169-19. The CPSIA sets forth a process for updating mandatory standards for durable infant or toddler products that are based on a voluntary standard, when a voluntary standards organization revises the standard. Consistent with the CPSIA update process, this direct final rule updates the mandatory standard for full-size baby cribs to incorporate by reference ASTM's 2025 version of the voluntary standard.

The rule is effective on 1 August 2026, unless the Commission receives a significant adverse comment by 3 June 2026. If the Commission receives such a comment, it will publish a document in the Federal Register, withdrawing this direct final rule before its effective date. The incorporation by reference of certain material listed in this rule is approved by the Director of the Federal Register as of 1 August 2026.

91 Federal Register (FR) 23908, 4 May 2026; Title 16 Code of Federal Regulations (CFR) Part 1219:

https://www.govinfo.gov/content/pkg/FR-2026-05-04/html/2026-08632.htm

https://www.govinfo.gov/content/pkg/FR-2026-05-04/pdf/2026-08632.pdf

A read-only copy of the existing (ASTM F1169-19), incorporated standard is available for viewing, at no cost, on the ASTM website at: https://www.astm.org/READINGLIBRARY/. A read-only copy of the revised standard (ASTM F1169-25), including a red-lined version that identifies the changes from the 2019 version to the 2025 version, is available, at no cost, on ASTM's website at: https://www.astm.org/CPSC.htm.

This direct final rule is identified by Docket Number CPSC-2010-0075. The Docket Folder is available from Regulations.gov at https://www.regulations.gov/docket/CPSC-2010-0075/document and provides access to primary and supporting documents as well as comments received. Documents are also accessible from Regulations.gov by searching the Docket Number. WTO Members and their stakeholders are asked to submit significant adverse comments to the USA TBT Enquiry Point by or before 4pm Eastern Time on 3 June 2026. Comments received by the USA TBT Enquiry Point from WTO Members and their stakeholders will be shared with CPSC and will also be submitted to the Docket on Regulations.gov if received within the comment period.

Other actions notified under the symbol G/TBT/N/USA/564 are identified by Docket Number CPSC-2019-0025.

__________

[1] This information can be provided by including a website address, a pdf attachment, or other information on where the text of the final/modified measure and/or interpretive guidance can be obtained.